he ball spline is a recirculating ball guide. This innovative product uses ball bearings that run in shaft grooves. The resulting contact has higher load capacity than the traditional linear bushing, and has the additional advantage of torque transmission while performing linear motion.
Basic dimensions | Basic load rating | Mass | Model | ||||
---|---|---|---|---|---|---|---|
Outer diameter | Flange diameter | Length | dynamic | static | Nut | Shaft | Bearing No. |
D [mm] | d1 [mm] | L [mm] | C [kN] | C0 [kN] | [kg] | [kg/m] | |
80 | 125 | 60.9 | 94.5 | 1950 | 15.5 | LT 50 | |
90 | 140 | 73.5 | 111.7 | 2500 | 22.3 | LT 60 | |
120 | 160 | 104.9 | 154.8 | 4680 | 39.6 | LT 80 | |
150 | 185 | 136.2 | 195 | 9550 | 61.8 | LT 100 | |
14 | 30 | 25 | 1.18 | 2.16 | 0.035 | 0.23 | LF 6 |
16 | 32 | 25 | 1.47 | 2.55 | 0.037 | 0.4 | LF 8 |
21 | 42 | 33 | 2.84 | 4.9 | 0.09 | 0.62 | LF 10 |
24 | 44 | 36 | 3.53 | 5.78 | 0.11 | 1.1 | LF 13 |
31 | 51 | 50 | 7.06 | 12.6 | 0.23 | 1.6 | LF 16 |
35 | 58 | 63 | 10.2 | 17.8 | 0.33 | 2.5 | LF 20 |
42 | 65 | 71 | 15.2 | 25.8 | 0.455 | 3.9 | LF 25 |
47 | 75 | 80 | 20.5 | 34 | 0.565 | 5.6 | LF 30 |
64 | 100 | 100 | 37.8 | 60.5 | 1.46 | 9.9 | LF 40 |
80 | 124 | 125 | 60.9 | 94.5 | 2.76 | 15.5 | LF 50 |
Contact us at the most favorable price
Contact us