HOME>PRODUCTS>Plain Bearings>Thrust spherical plain bearings

PRODUCTS

Ball Bearings

Roller Bearings

Bearing Units

Ball bearing units

Track Rollers

Plain Bearings

Linear Bearings

Other

Thrust spherical plain bearings

The thrust spherical plain bearing has a convex spherical surface on the shaft washer and a corresponding concave spherical surface on the shell washer. They are mainly used to withstand axial loads, but they can also withstand combined (radial and axial) loads. The thrust joint bearing is separable, and the shaft and housing washer can be installed separately.

Basic dimensions			Tilt angle	Basic load rating		Mass	Model
				dynamic	static		Bearing No.
d [mm]	D [mm]	T [mm]	α [°]	C [kN]	C0 [kN]	[kg]
17	47	16	2.6	32.85	52.65	0.14	GX 17 F Bearing
20	55	20	5	41.85	66.15	0.25	GX 20 F Bearing
25	62	22.5	4.2	62.55	100.8	0.42	GX 25 F Bearing
30	75	26	3.7	85.5	137.7	0.61	GX 30 F Bearing
35	90	28	4.9	120.6	194.4	0.98	GX 35 F Bearing
40	105	32	5.8	155.7	247.5	1.5	GX 40 F Bearing
45	120	36.5	6.2	201.6	319.5	2.25	GX 45 F Bearing
50	130	42.5	5.3	247.5	396	3.15	GX 50 F Bearing
60	150	45	5.8	337.5	540	4.65	GX 60 F Bearing
70	160	50	3.5	427.5	675	5.4	GX 70 F Bearing
80	180	50	3.9	513	823.5	6.95	GX 80 F Bearing
100	210	59	4.6	661.5	1062	11	GX 100 F Bearing
120	230	64	3.4	792	1287	14	GX 120 F Bearing